ATCA Storage Blade with RAID and iSCSI
- Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network FileSystem (NFS) or Common Internet File System (CIFS)
- Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
- Fully compliant with the IETF RFC3270 and RFC4171
- RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
- Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
- RAID spans 10, 50 and 60
- Battery pack option to prevent data loss
- Utilizes VadaTech’s proven IPMI Management Controller
Download Datasheet Add to Info Request
add to compare
The ATC605 is an AdvancedTCA Network Attached Storage Blade incorporating an onboard Intel Xeon E3-1505M and a high-performance hardware off-load engine for iSCSI Target, with an integrated back-end RAID storage subsystem.
The ATC605 has a dual 100/40/10GbE to the Fabric channel. The unit also has a 40GbE to the up-date channel that allows fail over across two of the ATC605 in the redundant configuration.
An advanced ROC co-processor off-loads the main CPU. Its main features include RAID levels 0, 1, 5 and 6 with RAID spans 10, 50 and 60. In addition, the ROC checks for consistency of background data integrity and patrol read for media scanning and repairing. The ROC has an optional battery pack to prevent data loss in the event of a power failure.
Also auto resume after loss of system power during array rebuild or reconstruction, load balancing, checks consistency for background data integrity. The RAID can be managed via a sophisticated GUI, running LSI MegaRAID software.
The storage devices are either NVMe style (two per AMC) or SATA SSD (one per AMC). See Ordering Options A and D.
The ATC605 implements IPMI 2.0 for its management and payload.
Key Features
- Internet Small Computer System Interface (iSCSI) and Network Attached Storage (NAS), could be Network FileSystem (NFS) or Common Internet File System (CIFS)
- Line rate iSCSI hardware off load engine at 40/10GbE (100G supported but not at the line rate)
- Fully compliant with the IETF RFC3270 and RFC4171
- RAID-on-Chip (ROC) dedicated I/O Processor off-loads the RAID stack
- Redundant Array of Independent Disks (RAID) levels 0, 1, 5 and 6
- RAID spans 10, 50 and 60
- Battery pack option to prevent data loss
- Utilizes VadaTech’s proven IPMI Management Controller
Benefits
- Hardware iSCSI off load engine for line rate speed
- High-performance ROC offload engine provides for high data integrity, with battery option for protection from data loss on power failure
- Flexible configuration through LSI MegaRAID software
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
ATC122
PCIe Gen 3 ATCA Carrier Low-Power Xeon E3
- ATCA Processing Carrier with a standard PCIe edge Module
- Xeon E3-1268L V3 Processor with 32 GB ECC
- Quad Core @ 2.3 GHz or Turbo Frequency @ 3.3 GHz
- x16 standard PCIe Gen 3 slot
- Dual 10GbE to Fabric channels, Dual GbE to Base channels and Dual GbE to the front panel
- Dual Display Port (DP) and VGA
- TPM (Optional)
View product
ATC122 Data Sheet
ATC133
10GbE Carrier w/ 4 Full-Size AMC Slots
- 10G ATCA Carrier
- Managed Layer 2 software
- Four full-size AMC slots
- Xilinx Virtex-7 FPGA
- (XC7V690T in FFG1761 package)
- Crossbar switch to connect FPGA to full mesh of backplane fabric
- 2x XAUI ports and 2x GbE ports for each AMC slot
- 4x XAUI ports for RTM expansion
- Utilizes VadaTech’s proven IPMI Management Controller
View product
ATC133 Data Sheet
VT830
6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers
- 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
- 10GbE/GbE Managed Layer 2
- 40GbE/10GbE/GbE Managed Layer 3
- 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
- Split power distribution (odd slots on A1/B1,even slots on A2/B2)
- Redundant Power supplies AC (DC or AC/DC optional)
- Up to four AC supply at 1300W each (N+1)
- 6 Rear Transition Module (RTM) slots
View product
VT830 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
