Shelf Management

VadaTech provides the highest-performance shelf managers for ATCA and MicroTCA systems, with features not found anywhere else in the industry. They are designed for easy integration with our own or other vendors’ systems. Our robust Carrier Manager and Shelf Manager software has been deployed for years with proven results. We also offer an IPMI Controller reference schematic as a complete hardware and software solution as a quick way for you to develop for the ATCA, AMC or MicroTCA form factor without prior IPMI knowledge.

 

Please contact us if you have any requirements that you don’t see below, our agile R&D team has many years’ experience in developing custom solutions.

UTC040C

MicroTCA Carrier Hub (MCH) Conduction Cooled, PCIe Gen3

  • Double module, mid-size per AMC.0
  • Conduction cooled for rugged applications
  • Unified 1GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
  • Layer 2/3 managed GbE Switch
  • Front panel provides 12 ports of GbE
  • Non-blocking PCIe Gen3 Switch with up to four PCIe Virtual Domains
View product UTC040C Data Sheet

UTC042

Rugged 3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

  • MTCA.1 ruggedization
  • Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC042s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 2 or 3 managed Ethernet switches
  • Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Single module, full size per AMC.0
View product UTC042 Data Sheet

UTC041

MTCA.3 Conduction Cooled MicroTCA Carrier Hub (MCH)

  • Single module, extended size per AMC.0
  • Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC041s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Non-blocking PCIe Gen3 or 10GbE fabric
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
View product UTC041 Data Sheet

UTC006

3rd Gen MicroTCA Carrier Hub (MCH), Double Module, 40/10GbE/PCIe/FPGA/SRIO

  • Fabric options include PCIe Gen3, 40/10GbE, SRIO, Cross Bar Switch (CBS) or Xilinx Virtex-7 690T FPGA for complete flexibility
  • Front panel fabric expansion, e.g. quad ports forPCIe Gen 3 (x4, x8, or x16)
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Double module, full size per AMC.0 and MTCA.4
  • 1GbE base switch with dual 100/1000/10 G uplink
  • Full Layer 3 managed Ethernet switch
  • Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC006s
View product UTC006 Data Sheet

UTC043

2nd Gen MicroTCA Carrier Hub, Layer 2 Managed Switch

  • Unified 1 GHz quad-core CPU for MicroTCA Carrier Management Controller (MCMC) and Shelf Manager
  • Layer 2 managed GbE switch with seven egress ports
  • Dual GbE to each AMC
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC043
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
  • HCSL 100 MHz fabric clock
View product UTC043 Data Sheet

UTC004

3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

 

  • Unified 1GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC004s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 3 managed Ethernet switches
  • Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Single module, full size per AMC.0
View product UTC004 Data Sheet

UTC003

for Conduction Cooled μTCA Chassis

  • Single module, full size module per AMC.0
  • 400MHz RISC CPU with 64MB DDR
    • for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Redundant boot system
    • ensures fail-safe upgrades
  • Fail-over with dual UTC003 in system
  • GbE to each AMC (Layer 2 managed)
  • Non-blocking PCIe x4 Gen 2 to each AMC slot with option for SRIO or 10GbE (Layer 3 managed)
  • Fabric clock with Spread Spectrum capability
  • Linux 2.6 embedded OS
  • IPMI 2.0 and HPM.1 compliant
  • Can run as an IPMI protocol analyzer to monitor all the I2C Busses
View product UTC003 Data Sheet

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC001

LEGACY

MCH for μTCA Chassis

  • Single module, full size module per AMC.0
  • 400MHz RISC CPU with 64MB DDR
    • for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Redundant boot system
    • ensure fail-safe upgrades
  • Fail-over with dual UTC001 in system
  • GbE to each AMC (Layer 2 managed)
  • SAS/SATA to each AMC
  • Non-blocking PCIe x4 Gen 2 to each AMC slot with option for SRIO or 10GbE (layer three managed) Telcom/GPS clock (Stratum-3)
  • Fabric clock with Spread Spectrum capability
  • Blue, Red, Amber and Green LEDs
  • Linux 2.6 embedded OS
  • IPMI 2.0 compliant
  • HPM.1 compliant
  • UTC001 can run as an IPMI protocol analyzer to monitor all the I2C Busses
View product UTC001 Data Sheet

UTC040C

MicroTCA Carrier Hub (MCH) Conduction Cooled, PCIe Gen3

UTC042

Rugged 3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

UTC041

MTCA.3 Conduction Cooled MicroTCA Carrier Hub (MCH)

UTC006

3rd Gen MicroTCA Carrier Hub (MCH), Double Module, 40/10GbE/PCIe/FPGA/SRIO

UTC043

2nd Gen MicroTCA Carrier Hub, Layer 2 Managed Switch

UTC004

3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

UTC003

for Conduction Cooled μTCA Chassis

UTC002

MicroTCA Carrier Hub, 2nd Generation

UTC001

MCH for μTCA Chassis

JTAG Switch Modules

UTC007

μTCA JTAG Switch Module (JSM)

  • JTAG Switch Module (JSM) per μTCA specification
  • Provides Transparent Communications between the Arbitrated Master and a selected Secondary Port
  • Mates directory to the Chassis that have the JSM connector
  • Support for 12 AMC, 2 MCH, 4 Power Module, 2 Cooling units and Front/Rear (21 Ports)
  • Operations via Front/Back, or the two MCH
  • Auto-detection of Port Presence
  • Three Arbitrated Master ports
  • Configuration Mode Uses IEEE 1149.1 TAP controller
  • Operation up to 50MHz
  • LED for Activity, Master Grant, Secondary port selection
View product UTC007 Data Sheet

UTC008

μTCA JTAG Switch Module (JSM)

  • JTAG Switch Module (JSM) per μTCA specification
  • Provides transparent communications between the arbitrated master and a selected secondary port
  • Mates directly to the chassis that have a JSM connector (standard compact-size AMC panel)
  • Supports up to 12 AMCs, 2 MCHs, 4 Power Modules, 2 Cooling Units and front/rear (21) ports
  • Operates via front/rear, or the 2 MCHs
  • Auto-detection of port presence
  • Three arbitrated master ports
  • Configuration mode uses IEEE 1149.1 TAP controller
  • Operation up to 50 MHz
  • LEDs for activity, master grant and secondary port selection
View product UTC008 Data Sheet

JTAG Switch Modules

( expand all )

UTC007

μTCA JTAG Switch Module (JSM)

UTC008

μTCA JTAG Switch Module (JSM)

VT040

Shelf Manager, 4th Generation ATCA, MTCA and VPX platforms

  • Quad ARM Cortex-A53 core @ 1.6 GHz per core
  • 4 GB LP-DDR4 memory
  • FRAM for log messages
  • 64 GB of NAND Flash
  • Option for 32 GB of Flash as removable SDHC
  • Form, fit functional to VadaTech VT001, VT002 and VT003
  • Operate across multiple platforms ATCA, MTCA and VPX like the previous generations
  • Dual 10/100 Ethernet Ports
  • I2C Real Time Clock with battery backup
View product VT040 Data Sheet

VT003

ATCA Shelf Manager, 3rd Generation

  • Quad Core ARM Freescale processor @ 1 GHz per core
  • One GB DDR3 memory
  • FRAM for log messages
  • 32GB of Flash
  • 8GB of NAND Flash
  • Form, fit functional to VadaTech VT001 and VT002
  • Dual 10/100 Ethernet ports
  • I2C Real Time Clock with battery backup
View product VT003 Data Sheet

VT002

ATCA Shelf Manager/Node

  • 32-bit RISC processor @ 400 MHz
  • 64 Mbytes of DDR @ 266Mhz
  • 128 Mbytes of flash
  • 32KByte FRAM for log messages
  • Form, fit, functional to VadaTech VT001 first generation product
  • Firmware is field upgradable with dual boot
  • Dual 10/100 Ethernet ports
  • Three RS-232 ports
  • Linux release 2.6.21
  • IPMI 2.0 compliant
  • Low power (3W)
  • RTC with 10 year battery life span
  • Runs as the Shelf Manager and/or Node
  • Each I2C bus has a 128-byte FIFO
  • Rich set of management software such as
  • HPI, RMCP+, SNMP, CLI, HTTP, HPM, E-Keying, etc.
View product VT002 Data Sheet

VT001

LEGACY

ATCA Shelf Manager/Node

  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Firmware is field upgradable
    • w/ 2 boot flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • IPMI 2.0 compliant
  • Low power (2.2W)
  • RTC with 10 year battery life span
  • Runs as the Shelf Manager and/or Node
  • Each I2C bus has a 64-byte FIFO
  • Rich set of management software such as HPI, RMCP+, SNMP, CLI, HTTP, E-Keying, etc.
View product VT001 Data Sheet

VT040

Shelf Manager, 4th Generation ATCA, MTCA and VPX platforms

VT003

ATCA Shelf Manager, 3rd Generation

VT002

ATCA Shelf Manager/Node

VT001

ATCA Shelf Manager/Node

ATCA Shelf Managers

( close )

VT038

Shelf Manager for VT836 3U AdvancedTCA Shelf

  • Shelf manager for use in VT836 AdvancedTCA shelf
  • Quad core ARM processor @ 1 GHz per core
  • One GB DDR3 Memory
  • FRAM for log messages
  • Field upgradable with dual boot flash (32 GB)
  • Telco alarms
  • 8 GB NAND Flash
  • IPMI 2.0 compliant
View product VT038 Data Sheet

VT011

Shelf Manager

  • Shelf manager for AdvancedTCA systems
  • Utilizing Gen 3 Shelf Manager VT003
  • Option to plug into ATC139 ATCA Carrier
  • Quad Core ARM Freescale processor
    • 1 GHz/core
  • One GB DDR3 memory
  • FRAM for log messages
  • 32GB of Flash
  • 8GB of NAND Flash
  • Quad 10/100 Ethernet ports
  • I2C Real Time Clock with battery backup
  • IPMI 2.0 compliant
View product VT011 Data Sheet

VT037

ATCA Shelf Manager for VT835

  • Quad core ARM processor @ 1GHz per core
  • One GB DDR3 Memory
  • FRAM for log messages
  • Field upgradable with dual boot flash
  • Telco alarms
  • Isolated DC/DC converter
  • IPMI 2.0 compliant
View product VT037 Data Sheet

VT032

ATCA Switching Shelf Manager, Managed Layer 3 Base Interface

  • Managed Layer 3 GbE Switch
  • Compliant to PICMG 3.0 base specifications
  • Dual GbE, 10/100 out-of-band, and RS-232 debug ports via RJ-45
  • Quad GbE and Dual 10GbE on the front panel
  • Software for Sensor Data Record, event logs, FRU inventory monitoring temp and power, ekeying, alarms and more
  • Telco alarm with Micro DB15 connector front panel interface
  • Active/standby redundancy when utilizing two VT032 in a system
View product VT032 Data Sheet

VT036

ATCA Shelf Manager and Managed Layer 2 Switch for VT834

  • Quad core ARM processor @ 1 GHz per core
  • One GB DDR3 Memory
  • Onboard managed layer 2 switch
  • FRAM for log messages
  • Field upgradable with dual boot Flash
  • Telco alarm with Micro DB15 connector front panel interface
  • Isolated DC/DC converter
  • IPMI 2.0 compliant
View product VT036 Data Sheet

VT039

Shelf Manager for VT825 13U AdvancedTCA Shelf

  • Shelf manager for use in VT825 AdvancedTCA shelf
  • Single module, full-size
  • Redundant failover between the two shelf managers
  • Quad Core ARM Freescale processor @ 1 GHz per core
  • 1 GB DDR3 memory
  • FRAM for log messages
  • 32 GB of Flash
  • 8 GB of NAND Flash
  • 10/100 Ethernet port
  • RS-232 ports
  • I2C Real Time Clock with battery backup
  • Rich set of Management software (refer to the VT003 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc
  • IPMI 2.0 compliant
  • RoHS compliant
View product VT039 Data Sheet

VT052

ATCA Switching Shelf Manager, Managed Layer 3 Base Interface

  • Managed Layer 3GbE Switch
  • Compliant to PICMG 3.0 base specifications
  • Dual GbE, 10/100 out-of-band, and RS-232 de-bug ports via RJ-45
  • Quad GbE and Dual 10GbE on the front panel
  • Software for Sensor Data Record, event logs, FRU inventory monitoring temp and power, e-keying, alarms and more
  • Telco alarm with Micro DB15 connector front panel interface
  • Active/standby redundancy when utilizing two VT052 in a system
View product VT052 Data Sheet

VT030

ATCA Switching Shelf Manager (SSM)

  • 10GbE Switching Shelf Manager
    • eliminates need for separate switch slots
  • Compliant to PICMG 3.0 base specs
  • Compliant to PICMG 3.1 fabric specs
  • Compact 1.0" H x 5.685" W x 11.096" D size
  • Octal 10GbE ports via SFP+
  • Dual GbE, 10/100 out-of-band, and RS-232 de-bug ports via RJ-45
  • Ten 10GbE ports routed to RTM for optional access
  • Software for Sensor Data Record, event logs, FRU inventory monitoring temp and power, e-keying, alarms and more
  • Unmatched front panel density, including LED indicators for Base, Fabric, SHMC, Reset, Power Fail, Standby, and more
  • Can run as an IPMI protocol analyzer to monitor the I2C busses.
  • IPMI 2.0 (or 1.5) compliant
  • Telco alarm with Micro DB15 connector front panel interface
  • Active/standby redundancy when utilizing two VT030 IMSs in a system
View product VT030 Data Sheet

VT031

Switching Shelf Manager (SSM) - 40G

  • Eliminates need for separate switch slots
  • Compliant to PICMG 3.0 base specs
  • Compliant to PICMG 3.1 fabric specs
  • Compact 1.0" H x 5.685" W x 11.096" D size
  • Quad 40GbE ports via QSFP+
  • Dual GbE, 10/100 out-of-band, and RS-232 ports via RJ-45
  • Octal 10GbE ports routed to RTM for optional access
  • Software for Sensor Data Record, event logs, FRU inventory monitoring temp and power, e-keying, alarms and more
  • Unmatched front panel density, including LED indicators for Base, Fabric, QSFP+, RJ-45, SHMC, Reset, Power Fail, Standby, and more
  • Can run as an IPMI protocol analyzer to monitor the I2C busses.
  • IPMI 2.0 (or 1.5) compliant
  • Telco alarm with Micro DB15 connector front panel interface
  • Active/standby redundancy when utilizing two VT031 SSMs in a system
View product VT031 Data Sheet

VT019

Shelf Manager for ELMA ATCA Chassis

  • For ELMA ATCA bused or radial chassis
  • 5W max power
  • 32-bit RISC processor @ 400MHz
  • 64 MB of DDR @ 266Mhz
  • 32Kbyte FRAM for log messages
  • Quad 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.21
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT019s in system
  • Rich set of Management software (refer to the VT002 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT019 can run as an IPMI protocol analyzer to monitor all the 40+ I2C busses
View product VT019 Data Sheet

VT014

for LCR Next Generation ATCA Chassis

  • 32-bit RISC processor @ 400 MHz
  • 64 Mbytes of DDR @ 266 MHz
  • 128 Mbytes of flash
  • 32KByte FRAM for log messages
  • Three 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms via VT092
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT014s in the system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT014 can run as an IPMI protocol analyzer to monitor the I2C busses
View product VT014 Data Sheet

VT004

Shelf Manager for LCR ATCA Chassis

  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT004s in the system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT004 can run as an IPMI protocol analyzer to monitor the I2C busses
View product VT004 Data Sheet

VT009

with Integrated PEM and Fan Controller

  • 32-bit RISC processor @ 400 MHz
  • 64 Mbytes of DDR @ 266Mhz
  • 128 Mbytes of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.21
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Active/standby redundancy when utilizing two VT009s in the system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • Integrated Intelligent Fan Controller
  • Integrated Power Entry Module (PEM)
View product VT009 Data Sheet

VT008

LEGACY

Compatible to Intel® MPCMM0002

  • Compatible to the Intel® MPCMM0002 
    • Form, fit and functionally
  • 5W max power
  • 2-bit RISC processor @ 180 MHz
  • 64 MB of SDRAM and 128 MB of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT008s in system
  • Rich set of Management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT008 can run as an IPMI protocol analyzer to monitor all the 40+ I2C busses.
View product VT008 Data Sheet

VT006

LEGACY

Shelf Manager for Kaparal Chassis

  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT006s in system
  • Rich set of management software (refer to the VT001 specification for all software components) such as  HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT006 can run as an IPMI protocol analyzer to monitor the I2C Busses
View product VT006 Data Sheet

VT018

LEGACY

Compatible to Intel® MPCMM0002

  • Compatible to the Intel® MPCMM0002 
    • Form, fit and functionally 
  • 5W max power
  • 32-bit RISC processor @ 400MHz
  • 64 MB of DDR @ 266Mhz
  • 32Kbyte FRAM for log messages
  • Quad 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.21
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT018s in system
  • Rich set of Management software (refer to the VT002 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT018 can run as an IPMI protocol analyzer to monitor all the 40+ I2C busses
View product VT018 Data Sheet

VT005

LEGACY

Compatible to Intel® MPCMM0001

  • Compatible to the Intel® MPCMM0001 
  • 5W max power
  • 32-bit RISC processor @ 180 MHz
  • 64 MB of SDRAM and 128 MB of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT005s in system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT005 can run as an IPMI protocol analyzer to monitor all the 40+ I2C Busses
View product VT005 Data Sheet

ATCA Shelf Managers

( expand all )

VT038

Shelf Manager for VT836 3U AdvancedTCA Shelf

VT011

Shelf Manager

VT037

ATCA Shelf Manager for VT835

VT032

ATCA Switching Shelf Manager, Managed Layer 3 Base Interface

VT036

ATCA Shelf Manager and Managed Layer 2 Switch for VT834

VT039

Shelf Manager for VT825 13U AdvancedTCA Shelf

VT052

ATCA Switching Shelf Manager, Managed Layer 3 Base Interface

VT030

ATCA Switching Shelf Manager (SSM)

VT031

Switching Shelf Manager (SSM) - 40G

VT019

Shelf Manager for ELMA ATCA Chassis

VT014

for LCR Next Generation ATCA Chassis

VT004

Shelf Manager for LCR ATCA Chassis

VT009

with Integrated PEM and Fan Controller

VT008

Compatible to Intel® MPCMM0002

VT006

Shelf Manager for Kaparal Chassis

VT018

Compatible to Intel® MPCMM0002

VT005

Compatible to Intel® MPCMM0001

Boards for IPMI Development

VT007

ATCA Bench-Top Shelf Manager and/or Protocol Analyzer

  • Bench-top stand-alone Shelf Manager
  • IPMI protocol analyzer that interfaces to any ATCA and/or VPX chassis via cable
  • 3W max power with 12V input
  • Quad core ARM @ 1 GHz per core
  • 64 MB of SDRAM and 128 MB of flash
  • Dual 10/100 Ethernet Ports
  • RS-232 Debug Port
  • Field upgradable with dual boot flash
  • Telco alarms
View product VT007 Data Sheet

ATC001

Complete ATCA IPMI Test Suite

  • Capture and store I2C bus data
  • Analyzer mode
  • Exerciser mode
  • Compliance test mode
  • Graphical User Interface (GUI)
  • Field-upgradable firmware
  • Two 10/100 Mbit Ethernet ports routed to the front panel or to zone 2
  • Option for VadaTech VT028 for evaluation and testing
  • Option for VadaTech VT027 for evaluation and testing
  • VT027 option allows four NXP LPC2138’s to be programmed at a time
  • IPMI 2.0 compliant
View product ATC001 Data Sheet

Boards for IPMI Development

( expand all )

VT007

ATCA Bench-Top Shelf Manager and/or Protocol Analyzer

ATC001

Complete ATCA IPMI Test Suite

IPMI Fan Controllers

( close )

VT097

IPMI Fan Controller for μTCA Chassis

  • Cooling Unit (CU) controller for μTCA
  • Dual IPMI bus for redundancy
  • Three additional I2C busses
  • Manages up to five zones
  • Five PWM signals
  • Five TACH inputs†
  • Three inputs for IPMI hardware address
  • +12V input
  • Blue, Red, Amber and Green LEDs
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Firmware is field upgradable
  • IPMI 2.0 compliant
  • External as well as internal WDT
  • Available with industrial temp range
View product VT097 Data Sheet

VT096

IPMI Fan Controller for μTCA Chassis

  • Cooling Unit (CU) controller for μTCA
  • Dual IPMI bus for redundancy
  • Three additional I2C busses
  • Manages up to five zones
  • Five PWM signals†
  • Ten TACH inputs†
  • Three inputs for IPMI hardware address
  • +12V input
  • Blue, Red, Amber and Green LEDs
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Firmware is field upgradable
  • IPMI 2.0 compliant
  • External as well as internal WDT
  • Available with industrial temp range
View product VT096 Data Sheet

VT098

IPMI Fan Controller for ATCA Chassis

  • Dual IPMI busses for redundancy
  • Manages up to six fans
  • Three PWM signals
  • Six TACH inputs
  • Eight inputs for IPMI hardware address
  • +12V input
  • Blue, Red, Amber and Green LEDs
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Firmware is field upgradable
  • IPMI 2.0 compliant
  • External as well as internal WDT
  • Available with industrial temp range
View product VT098 Data Sheet

IPMI Fan Controllers

( expand all )

VT097

IPMI Fan Controller for μTCA Chassis

VT096

IPMI Fan Controller for μTCA Chassis

VT098

IPMI Fan Controller for ATCA Chassis

VPX Switches and Shelf Managers

( close )

VPX006

3U OpenVPX Switch, CBS, Integrated Health Management

  • Unified 1GHz quad-core CPU for, Shelf Manager, and Fabric management
  • Automatic fail-over with redundant VPX006s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 3 managed Ethernet switches
  • Non-blocking Crossbar Switch (CBS)
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • VITA 46 and VITA 65 compliant
View product VPX006 Data Sheet

VPX005

3U OpenVPX Switch, 10/40GbE with Integrated Health Management

  • Unified 1 GHz quad-core CPU for, Shelf Manager, and Fabric management
  • Automatic fail-over with redundant VPX005
  • Dual 100/1000/10G uplink on the front panel
  • Full Layer 3 managed Ethernet switches
  • Non-blocking 10/40GbE
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • VITA 46 and VITA 65 compliant
View product VPX005 Data Sheet

VPX007

6U OpenVPX Switch, 10GbE with Optional Health Management

  • Versatile Layer 2 managed Ethernet switch
  • Total of 24 Ports of 10GbE
  • Up to eight SFP+ Ports on the front panel
  • Unified 1 GHz quad-core CPU for Shelf Manager, and Fabric management
  • Automatic fail-over with redundant VPX007
  • Frequency disciplined to GPS/SyncE (Slave the SyncE)
  • VITA 46 and VITA 65 compliant
View product VPX007 Data Sheet

VPX008

3U OpenVPX Switch, SRIO Gen 2 with Integrated Health Management

  • Unified 1 GHz quad-core CPU for, Shelf Manager, and Fabric management
  • Automatic fail-over with redundant VPX008
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 3 managed Ethernet switch
  • SRIO switch Gen2
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • VITA 46 and VITA 65 compliant
View product VPX008 Data Sheet

VPX010

NEW

6U OpenVPX 100G Switch with Integrated Health Management

  • Unified 1.5 GHz quad-core CPU for, Shelf Manager, JSM, and Fabric management
  • Six 100G egress Ports on the front panel (configurable as six 40GbE)
  • Each 100G/40G Port could be bifurcated to four 10G/1G Ports
  • Automatic fail-over with redundant VPX010
  • Full Layer 3 managed Ethernet switches
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Non-blocking 100/40/10G/1GbE
  • VITA 46 and VITA 65 compliant
View product VPX010 Data Sheet

VPX009

NEW

24 x 10G BASE KR Switch with Optional Health Management , 6U VPX

  • Versatile Layer 2 managed Ethernet switch
  • Total of 24 Ports of 10GBASE-KR to P1/P2
  • Unified 1 GHz quad-core CPU for Shelf Manager, and Fabric management
  • Automatic fail-over with redundant VPX009
  • Frequency disciplined to GPS/SyncE (Slave the SyncE)
  • VITA 46 and VITA 65 compliant
View product VPX009 Data Sheet

VPX982

NEW

Chassis Manager with JTAG Switch Module (JSM), 3U VPX

  • Quad Core ARM Cortex-A53 processor @ 1.6 GHz per core
  • 4GB DDR4 memory with FRAM for log messages
  • 64GB Flash
  • JSM with 12 JTAG Ports
  • I2C Real Time Clock with battery backup
  • Low power (4W)
  • IPMI 2.0 compliant
View product VPX982 Data Sheet

VPX004

3U OpenVPX Switch, PCIe Gen 3 with Integrated Health Management

  • Unified 1 GHz quad-core CPU for, Shelf Manager,and Fabric management
  • Automatic fail-over with redundant VPX004
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 3 managed Ethernet switch
  • Non-blocking PCIe Gen 3
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • VITA 46 and VITA 65 compliant
View product VPX004 Data Sheet

VPX980

Chassis Manager with JTAG Switch Module (JSM), 6U VPX

  • Quad Core ARM Freescale processor @ 1 GHz per core
  • One GB DDR3 memory with FRAM for log messages
  • 32 GB of Flash, 8 GB of NAND Flash
  • JSM with 18 JTAG Ports
  • I2C Real Time Clock with battery backup
  • Low power (4W)
  • IPMI 2.0 compliant
View product VPX980 Data Sheet

VPX Switches and Shelf Managers

( expand all )

VPX006

3U OpenVPX Switch, CBS, Integrated Health Management

VPX005

3U OpenVPX Switch, 10/40GbE with Integrated Health Management

VPX007

6U OpenVPX Switch, 10GbE with Optional Health Management

VPX008

3U OpenVPX Switch, SRIO Gen 2 with Integrated Health Management

VPX010

6U OpenVPX 100G Switch with Integrated Health Management

VPX009

24 x 10G BASE KR Switch with Optional Health Management , 6U VPX

VPX982

Chassis Manager with JTAG Switch Module (JSM), 3U VPX

VPX004

3U OpenVPX Switch, PCIe Gen 3 with Integrated Health Management

VPX980

Chassis Manager with JTAG Switch Module (JSM), 6U VPX