ATCA Shelf Manager for VT835

  • Quad core ARM processor @ 1GHz per core
  • One GB DDR3 Memory
  • FRAM for log messages
  • Field upgradable with dual boot flash
  • Telco alarms
  • Isolated DC/DC converter
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare

The VadaTech VT037 is a Shelf Manager for the VT835 chassis. The VT037 has 5W power consumption. The VT037 can also run as aprotocol analyzer to monitor, inject, capture and validate I2C traffic on the Intelligent Platform Management Bus (IPMB) busses.

A Graphical User Interface (GUI) validates and displays the IPMI packets or schedules IPMI messages for injection into the shelf. The GUI application communicates with the VT037 through the Ethernet port.

Each IPMI bus has a 64-byte FIFO to allow for a full IPMI packet on each I2C bus so there is no packet loss during operation.

When two VT037s are in the system, they operate in redundant active/standby mode. During operation one VT037 is active while the second one is synchronized in hot standby mode. The VT037 is fully hot-swappable to minimize service down time. Lithium Battery and/or Super CAP for the Real Time Clock.

Key Features
  • Quad core ARM processor @ 1GHz per core
  • One GB DDR3 Memory
  • FRAM for log messages
  • Field upgradable with dual boot flash
  • Telco alarms
  • Isolated DC/DC converter
  • IPMI 2.0 compliant
Benefits
  • Active/standby redundancy when utilizing two VT037s
  • Rich set of Management software such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT037 can run as an IPMI protocol analyser to monitor all IPMB busses
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC126

Rugged Blade Processor w/ Dual Xeon E5

  • Dual 14-core Intel® Xeon® E5-2658, 2680 or 2648L v4 processors
  • Eight banks of DDR4 with ECC for up to 256 GB memory
  • 10/40GbE Fabric channels
  • Dual 10/100/1000Base-T Base Channels
  • Dual 10/100/1000Base-T egress Ports
  • Dual 10GbE Copper
  • Two USB 2.0 and two USB 3.0 front panel Ports
  • Graphics and RS-232 front panel Ports
  • IPMI Management Controller with Serial Over LAN capabilities (SOL)
  • Trusted Platform Module (TPM)
  • BIOS redundancy boot with multiple Watch Dog Timers (WDT) for fail-over, before and after BIOS boot
View product ATC126 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

VT835

3U ATCA Hybrid Chassis with 8 AMCs AMCs (Mid-size)

  • 19” rack mount 3U ATCA Hybrid AMC Chassis
  • 1x ATCA slot, 8 mid-size AMC slots and 2x ATCA RTM slots
  • 40G or 10G fabric across the backplane
  • x8 PCIe Gen3, x4 Gen3 SRIO, or Layer 2/3 managed 10GbE/40GbE dual XAUI
  • Redundant push/pull cooling configuration
  • Integrated dual shelf managers, switch and AMC carrier
  • Full redundancy for all FRUs
  • Redundant AC or DC Power Modules
  • ESD Jack
View product VT835 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.