AMC722

Xeon E3-1125 Processor AMC, Dual SRIO

LEGACY *
  • Single module, mid-size (option for full-size) per AMC.0
  • Processor AMC with Intel® Xeon™ with an 8900 Series PCH
  • SRIO on ports 4-7 and 8-11 (AMC.4)
  • GbE to ports 0 and 1 (AMC.2)
  • SATA to ports 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 memory with ECC
  • Option for up to 32 GB Flash
  • Serial over LAN
  • IPMI 2.0 compliant
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The AMC722 is a Processor AMC (PrAMC) in a single module, mid-size AdvancedMCTM (AMC) form factor based on the Intel® Xeon™ Processor with an 8900 Series PCH.

The module follows the AMC.2, AMC.3 and the AMC.4 specifications. The module provides dual x4 SRIO on ports 4-11 per AMC.4, dual GbE on ports 0 and 1 per AMC.2, and SATA on ports 2 and 3 per AMC.3. It also provides dual GbE to the front. The SRIO v2.1 on AMC722 supports baud rates of 1.25, 2.5, 3.125 and 5 Gbaud.

The AMC722 has option for up to 16 GB of DDR3 memory with ECC. Further the AMC722 provides 32 GB of Flash for the OS. The AMC722 has serial over LAN with hardware Random Number Generator (RNG) as seed generator for authentication.

The BIOS allows booting from on board Flash, off board SATA, PXE boot as well as USB.

Linux OS is standard on the AMC722, consult VadaTech for other options.

Key Features
  • Single module, mid-size (option for full-size) per AMC.0
  • Processor AMC with Intel® Xeon™ with an 8900 Series PCH
  • SRIO on ports 4-7 and 8-11 (AMC.4)
  • GbE to ports 0 and 1 (AMC.2)
  • SATA to ports 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 memory with ECC
  • Option for up to 32 GB Flash
  • Serial over LAN
  • IPMI 2.0 compliant
  • RoHS compliant
Benefits
  • High performance processor with various chipset options
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC520

AMC 10-channel ADC, MicroTCA.4

  • Double module AMC, compliant to μTCA.4
  • Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
  • Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • Backplane PCIe Dual x4 or x8/Dual GbE
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Option for QDR-II+
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Dual SFP+ (up to 6.6Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
View product AMC520 Data Sheet

UTC018

AC Power Module, 1000W

  • Double-module, 12HP size module per AMC.0
  • Universal AC input (85 to 265V), 1000W
  • Provides power up to 12 AMCs, 2 MCHs and Cooling Units
  • Very low ripple voltage on +12V
  • Hot swappable with two banks of 256K flash for redundancy
  • Dual IPMI bus
  • 32–bit RISC processor
View product UTC018 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications