QorIQ P2020 Processor AMC

  • Processor AMC with P2020 @ 1.2Ghz
  • Single module, mid size per AMC.0
    • option for full size
  • PCIe on ports 4-7, SRIO on ports 4-7 option
  • Dual SRIO x1 on port 4 and 8 option
  • PCIe Gen1 @ 2.5 Gbit per lane (x4 lane)
  • SRIO @ 3.125 Gbit per lane (x4 lane or two x1 lane)
  • PCIe is configurable as Host (Root Complex) or Agent
  • Up to 4GBytes of DDR3 memory with ECC
  • Dual GbE per AMC.2 specification on ports 0 and 1
  • 32Mbytes of NOR Flash and 256 Mbytes of NAND Flash
  • IPMI 2.0 compliant
  • OS support for Linux and VxWorks

Download Datasheet Add to Info Request

add to compare
0

The AMC717 is a Processor AMC (PrAMC) in a single module, mid size AdvancedMC™ (AMC) form factor based on the Freescale P2020. The module follows the AMC.1, AMC.2 and the AMC.4  specifications. The module is ideal for data flow management within a chassis. The PCIe/SRIO interface is configurable as Host or Agent mode. The PCIe option runs as x4 while the SRIO can run as x4 or dual x1. The module has option for up to 4GBytes of DDR3 memory with ECC.  It provides Dual GbE to the rear per AMC.2 specification and a single GbE to the front.

Key Features
  • Processor AMC with P2020 @ 1.2Ghz
  • Single module, mid size per AMC.0
    • option for full size
  • PCIe on ports 4-7, SRIO on ports 4-7 option
  • Dual SRIO x1 on port 4 and 8 option
  • PCIe Gen1 @ 2.5 Gbit per lane (x4 lane)
  • SRIO @ 3.125 Gbit per lane (x4 lane or two x1 lane)
  • PCIe is configurable as Host (Root Complex) or Agent
  • Up to 4GBytes of DDR3 memory with ECC
  • Dual GbE per AMC.2 specification on ports 0 and 1
  • 32Mbytes of NOR Flash and 256 Mbytes of NAND Flash
  • IPMI 2.0 compliant
  • OS support for Linux and VxWorks
Benefits
  • Configurable PCIe interface as host or agent mode allowing x8 or dual x4 signalling.  
  • Multiple banks of memory allows large buffer sizes and queuing during processing
  • Ideal for dataflow management
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC610

AMC 4 Port Gigabit Ethernet with 2.5” Disk

  • AMC.1 and AMC.3
  • Single-width, mid size (option for full size)
  • 4 Gigabit Ethernet ports via RJ-45
  • On board 2.5” disk with direct connect toPorts 2 and 3
  • PCIe Gen2 x4 lanes to Ports 4-7
  • IPMI 2.0 compliant
  • RoHS compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product AMC610 Data Sheet

UTC002

MicroTCA Carrier Hub, 2nd Generation

  • 400 MHz CPU with 64 MB DDR for MCMC (MicroTCA Carrier Management Controller) and Shelf Manager
  • Layer 2 managed GbE to each AMC (optional)
  • Non-blocking PCIe Gen 3 (x4), to each slot with option for SRIO or 10GbE (Layer 2 managed)
  • Redundant boot system to ensure fail-safe upgrades
  • Automatic fail-over with dual UTC002
  • SAS/SATA to each AMC (optional)
  • Telecom/GPS clock (Stratum-3)
  • Fabric clock with spread spectrum capability
  • Single module, full size per AMC.0
  • HPM.1 and IPMI 2.0 compliant
View product UTC002 Data Sheet

UTC010

MicroTCA DC Power Module, 792W

  • Dual -36VDC to -75VDC input,
  • 792W (available in 396W)
  • Hot swappable with support for power module redundancy
  • Available in MTCA.3 Conduction Cooled version
  • Dual IPMI bus
  • 32-bit RISC processor
  • Two banks of 256K flash for redundancy
  • Modules can be turned on without an MCH in the system
  • External as well as internal WDT
View product UTC010 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.