AMC720

Xeon E3-1125 Processor AMC, PCIe

LEGACY *
  • Intel® Xeon™ E3 processor
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • PCIe Gen2
    • Gen3 on v2 option
    • x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
  • Option for 32 GB SATA drive
  • Serial over LAN
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare

The AMC720 is a flexible processor AMC for general purpose processing. The AMC720 has quad-core Xeon and Linux support, it can act as system host and data processing engine. The dual front-panel GbE ports provide simple network connectivity, so while the unit is designed for embedded processing (i.e. typically without a monitor), it is straightforward to use with a virtual desktop on a remote PC/laptop for development and setup.

The AMC can be used in MicroTCA chassis from 2 to 12 slot, where virtual domain configurations can support multi-host implementations. The PCIe Gen3 option on the v2 processor allows the AMC to be used with the latest interface modules.

The BIOS allows booting from on-board Flash, on- or off-board SATA, PXE boot, and USB, providing flexibility in deployment model used.

The AMC720 is available in both air-cooled (MTCA.0 and MTCA.1) and rugged conduction cooled(MTCA.2 or MTCA.3) versions.

Key Features
  • Intel® Xeon™ E3 processor
  • Conduction cooled version available
  • Single module, mid-size per AMC.0
  • PCIe Gen2
    • Gen3 on v2 option
    • x4 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE to port 0 and 1 (AMC.2) and SATA to port 2 and 3 (AMC.3)
  • Dual GbE to the front panel
  • Up to 16 GB of DDR3 w/ ECC and 32 GB Flash
  • Option for 32 GB SATA drive
  • Serial over LAN
  • IPMI 2.0 compliant
Benefits
  • Quad core Xeon for data processing with dual GbE ports
  • Optional SSD for local storage
  • Flexible boot options
  • Strong mil/aero support
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC520

AMC 10-channel ADC, MicroTCA.4

  • Double module AMC, compliant to μTCA.4
  • Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
  • Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • Backplane PCIe Dual x4 or x8/Dual GbE
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Option for QDR-II+
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Dual SFP+ (up to 6.6Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
View product AMC520 Data Sheet

VT811

8U uTCA.4 Chassis Platform

  • uTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
  • Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane
  • Redundant FRU information devices and carrier locator
  • Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT811 Data Sheet

VT872

½ ATR Short, 6 AMC, Conduction Cooled

  • μTCA.3 Conduction Cooled System Platform
  • 1/2 Short Air Transport Rack (ATR) per ARNIC404A, with NO internal fan (12.62” deep without handle)
  • Customized Front Input/Output (I/O) Panel Connector layout per customer requirement (option per MIL-DTL-M38999)
  • Designed to meet MIL-STD-810F for shock/vibration and MIL-STD-461E for EMI
  • Single MCH and Power Module slot
  • Up to 6 mid-size AMCs
  • Radial I2C bus to each AMC
  • High-speed routing on 26 layers
  • FRU information devices with chassis locator
  • CLK1, CLK2 and CLK3
  • No active components on the backplane
  • Secondary mounting provision to allow the chassis to be secured to a base plate
  • RoHS compliant
View product VT872 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications