Shelf Manager for LCR ATCA Chassis

  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT004s in the system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT004 can run as an IPMI protocol analyzer to monitor the I2C busses

Download Datasheet Add to Info Request

add to compare
0

The VT004 is a carrier which utilizes the VadaTech VT001 Shelf Manager. The carrier is designed to fit the LCR chassis. The carrier meets all the requirements per ATCA specification including Telco alarms, isolated DC/DC converter, LEDs, etc.

When two VT004s are in the system, they operate in redundant active/standby mode. During operation one VT004 is active while the second one is synchronized in hot standby mode. The VT004 is fully hot-swappable to minimize service down time.

Each IPMI bus has a 64-byte FIFO to allow for a full IPMI packet on each I2C bus so there is no packet loss during operation. 

The VT004 can also run as a protocol analyzer to monitor, inject, capture and validate I2C traffic on the Intelligent Platform Management Bus (IPMB). A Graphical User Interface (GUI) validates and displays the IPMI packets or schedules IPMI messages for injection into the shelf. The GUI application communicates with the VT004 through the Ethernet port.

Key Features
  • 32-bit RISC processor @ 180 MHz
  • 64 Mbytes of SDRAM
  • 128 Mbytes of flash
  • Dual 10/100 Ethernet ports
  • RS-232 Debug port
  • Linux release 2.6.15
  • Field upgradable with dual boot flash
  • IPMI 2.0 compliant
  • Telco alarms
  • Isolated DC/DC converter
  • Active/standby redundancy when utilizing two VT004s in the system
  • Rich set of management software (refer to the VT001 specification for all software components) such as HPI, RMCP, SNMP, CLI, HTTP, etc.
  • VT004 can run as an IPMI protocol analyzer to monitor the I2C busses
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ART131

ATCA Rear Transition Module

  • Zone three dual PCIe x8
    • to I-Pass connectors
  • Managed Layer 2GbE switch
  • 8 GbE 10/100/1000 copper ports
  • Quad GbE via SFP
  • Zone 3 dual GbE to the Switch Fabric
  • Zone 3 dual 10GbE with SFP+
  • IPMI RS-232 port
  • IPMI Version 2.0 compliant
View product ART131 Data Sheet

ATC133

10GbE Carrier w/ 4 Full-Size AMC Slots

  • 10G ATCA Carrier
  • Managed Layer 2 software
  • Four full-size AMC slots
  • Xilinx Virtex-7 FPGA
    • (XC7V690T in FFG1761 package)
  • Crossbar switch to connect FPGA to full mesh of backplane fabric
  • 2x XAUI ports and 2x GbE ports for each AMC slot
  • 4x XAUI ports for RTM expansion
  • Utilizes VadaTech’s proven IPMI Management Controller
View product ATC133 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.