48-Port GbE with 10-GbE Uplink Switch

LEGACY *
  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant

Download Datasheet Add to Info Request

add to compare
0

The ATC800 is an AdvancedTCA Gigabit Ethernet switch that serves a number of egress ports using FP sockets and one XFP socket for 10Gigabit Ethernet. In addition the module has five 10/100/1000-BaseTX ports in the front. The use of the SFP sockets allows each port to be loaded with a plug in module to support Ethernet over fiber, either single-mode or multi-mode, or copper. This flexibility allows a mix of fiber/copper interfaces to meet changing customer requirements.

The ATC800 switch has a total of 50 egress ports. The module has a 10GbE port on its fabric channel for fail-over across two ATC800 boards. In addition, the module has inter-switch communication across it’s two switch fabrics to support full wire speed on all the ports. The module routes 18 ports to Zone 3. 

The ATC800 IPMI controller can be configured to run as the shelf manager or as a Node. When used as the shelf manager, this allows customers to not have dedicated shelf managers in the system which reduces the total cost of the system.

The ATC800 runs Open Architect™firmware for it’s network management software.

Key Features
  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
Benefits
  • Shelf management functionality included
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related News
VIDEO

November 16, 2020

Learn about VadaTech supported tools available for open standard embedded systems. Be sure to watch Part 2.   view video...

VIDEO

November 16, 2020

Learn about VadaTech supported tools available for open standard embedded systems.Be sure to also view Part 1.    view video...

Related Products

ATC131

ATCA Carrier for Two PCIe Modules

  • Two PCI Express x16 slots
  • Configurable PCIe lanes as x1, x2, x4 or x8
  • 2 10GbE Fabric Channel routed to Zone 3
  • 2 1GbE base channel routed to Zone 3
  • Adjustable hold-down brackets
  • Advanced TCA 3.0 Release 2.0 compliant
  • Option for on board shelf manager
  • IPMI Version 2.0 compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
View product ATC131 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications