1U MTCA.4 Chassis with 2 AMC Slots, Economic

  • Compact 1U MicroTCA.4 chassis
  • Compliant to MTCA.4 specifications with rear IO
  • Supports up to two MTCA.4 mid-size, double module AMCs and Rear Transition Modules (RTMs)
  • Side to side airflow
  • Integrated shelf manager with GbE Switch
  • Point-to-point backplane routing across the two AMC slots on Ports 4-7 and 8-11
  • Single 400W AC pluggable from rear
  • Optional JTAG Switch Module (JSM)

Download Datasheet Add to Info Request

add to compare

The VT819 is the ideal MTCA.4 Development Platform. The low-cost unit offers two AMCslot, an integrated MCH and a managed Layer two GbE Switch. The double module AMCsmeet the MTCA.4 specification for applications that require rear I/O and signal conditioning.

The Module routes TCLKA/B/C/D as well CLK3 as 100Mhz HCSL.

Power Supplies

The VT819 uses a removable 400W AC power supply. It is located in the rear of the chassis.

Cooling and Temperature Sensors

The VT819 has an intelligent Cooling Unit. The cooling airflow is from right to left. Theremovable air filter has an optical switch to detect its presence and can be monitored forwhen it needs to be replaced.

There are temperature sensors in the chassis that monitor the intake and the outtake airtemperature throughout the chassis.

Scorpion™ Software

VadaTech’s Scorpionware software can be used to access information about the currentstate of the Shelf or the Carrier, obtain information such as the FRU population, or monitoralarms, power management, current sensor values, and the overall health of the Shelf. Thesoftware GUI is very powerful, providing a Virtual Carrier and FRU construct for a simple,effective interface.

JSM

There is an optional JTAG Switch Module to provide JTAG access to the front.

Key Features
  • Compact 1U MicroTCA.4 chassis
  • Compliant to MTCA.4 specifications with rear IO
  • Supports up to two MTCA.4 mid-size, double module AMCs and Rear Transition Modules (RTMs)
  • Side to side airflow
  • Integrated shelf manager with GbE Switch
  • Point-to-point backplane routing across the two AMC slots on Ports 4-7 and 8-11
  • Single 400W AC pluggable from rear
  • Optional JTAG Switch Module (JSM)
Benefits
  • Low-cost development chassis for MicroTCA.4 in a compact 1U size
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • AS9100 and ISO9001 certified company
  • Full system supply from industry leader
Specifications
Specifications

Block diagram

Related News
Related Products

AMC522

MTCA.4 AMC Dual DAC, 16-bit @ 250 MSPS

  • Dual channel DAC 16-bit @ 250 MSPS (MAX5878)
  • Compliant to MTCA.4, double module, mid-size (full-size optional) with rear I/O
  • Xilinx Kintex-7 FPGA
  • Dual PCIe x4 or PCIe x8
  • JTAG interface port
  • AMC.1, AMC.2, AMC.4 compliant (FPGA programmable)
  • IPMI v2.0 compliant
View product AMC522 Data Sheet

AMC725

Xeon E3 Processor, 10GbE, MTCA.4, Double Module, AMC

  • Double-module, mid-size per AMC.0 and MTCA.4
  • Intel® Xeon E3 processor options with PCH
  • DVI graphics (SM750 w/ 16 MB DDR) up to 1920x1440 resolution
  • PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
  • PCIe Gen3 x8, dual SATA and quad USB to RTM
  • Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel
View product AMC725 Data Sheet

CM045

μTCA.4 Kintex-7 Data Processing AMC (TCK7)

  • Data Processing AMC in double module, mid-size (full-size optional)
  • Compliant to MicroTCA.4
  • Class D1.2 compatible
  • High-speed Kintex-7 FPGA
  • 16 GB DDR3 SDRAM
  • Octal SFP+ via the front panel
  • PCIe x4 Gen 3
  • Two channels of GbE
  • Ten direct low latency connections to backplane
  • Four low latency connections to RTM
  • LVDS parallel bus to RTM
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
View product CM045 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.