ADC 8-bit @ up to 56 GSPS, 1/2/4 Channel, UltraScale™ XCKU115, AMC

LEGACY *
  • Xilinx UltraScale™ XCKU115 FPGA
  • 8-bit ADC at up to 56 GSPS
  • 1 x 56, 2 x 28 or 4 x 14 GSPS channel
  • 24 GB of DDR4 Memory (3 banks of 64-bit)
  • ADC is 65 nm CMOS process technology
  • Very low power consumption (5W for the ADC)
  • Single module, mid-size or full-size
  • Calibration warning and over-range flags
  •  –3 dB analog input bandwidth nominally 15 GHz
  • Internal 14 GHz VCO/PLL per I/Q ADC pair
  • Differential analog input: 1.0V PPD

Download Datasheet Add to Info Request

add to compare
0

The AMC590 used the Fujitsu MB8AC2070 ADC (Analog to Digital Converter) to provide 56 GSPS from a single channel, 28 GSPS from two channels, or 14 GSPS from four channels (user selectable). The board is compliant to the AMC.1 and AMC.2 specifications.

The AMC590 allows the implementation of extremely fast, high-resolution ADCs in CMOS process technology. The ADC is ideal for applications that require ultra-high performance analog and digital processing such as 100G applications. Achieved input bandwidth depends on system configuration and operating conditions, contact VadaTech for details.

The AMC590 features a Xilinx UltraScale™ XCKU115 FPGA with 5520 DSP Slices. The FPGA interfaces directly to the AMC and allows the core to interface to the host with multiple protocols such as 40GbE, 10GbE, PCIe or SRIO. The FPGA has 3 banks of 64-bit DDR4 memory (24 GB total).

See Solution Brief for an overview of a 56 GSPS digitizer with IRIGB/GPS timestamping.

Key Features
  • Xilinx UltraScale™ XCKU115 FPGA
  • 8-bit ADC at up to 56 GSPS
  • 1 x 56, 2 x 28 or 4 x 14 GSPS channel
  • 24 GB of DDR4 Memory (3 banks of 64-bit)
  • ADC is 65 nm CMOS process technology
  • Very low power consumption (5W for the ADC)
  • Single module, mid-size or full-size
  • Calibration warning and over-range flags
  •  –3 dB analog input bandwidth nominally 15 GHz
  • Internal 14 GHz VCO/PLL per I/Q ADC pair
  • Differential analog input: 1.0V PPD
Benefits
  • Highest sampling rate for the module size in the industry
  • Uses MB8AC2070 ADC
  • Low power consumption – CMOS process technology
  • Flexible selection of sample rate and channel count
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC104

AMC Carrier for PCIe Gen 3 Module

  • AMC PCIe Gen 3 carrier (x4 or x8)
  • Double module, full-size
  • Accept any standard PCIe edge style module
    • connector is x16
  • IPMI 2.0 compliant
View product AMC104 Data Sheet

AMC626

Integrated RAID, Expansion w/HBA

  • Host Bus Adapter (HBA) for external SATA III (6.0 Gbps) or SAS-3 (12 Gbps) drives
  • AMC.1 compliant, PCIe Gen3 x8 or x4
  • Support for 8 SAS/SATA ports
  • Dual expansion ports to external devices
  • Integrated RAID 0, 1, 1E, and 10
  • Single module, mid-size (full-size options available)
View product AMC626 Data Sheet

VT899

7U uTCA Cube Chassis, 6 AMC

  • 7U μTCA Cube
  • 5” x 7U x 9” deep (with handles 10” deep)
  • Redundant Cooling Units
  • Up to six AMCs: 6 full size single module or 3 full size double module
  • Radial I2C bus to each AMC
  • Single Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front
View product VT899 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* The specifications and product details found in this preliminary datasheet are subject to change without notice.