ATCA Shelf Manager/Node

  • 32-bit RISC processor @ 400 MHz
  • 64 Mbytes of DDR @ 266Mhz
  • 128 Mbytes of flash
  • 32KByte FRAM for log messages
  • Form, fit, functional to VadaTech VT001 first generation product
  • Firmware is field upgradable with dual boot
  • Dual 10/100 Ethernet ports
  • Three RS-232 ports
  • Linux release 2.6.21
  • IPMI 2.0 compliant
  • Low power (3W)
  • RTC with 10 year battery life span
  • Runs as the Shelf Manager and/or Node
  • Each I2C bus has a 128-byte FIFO
  • Rich set of management software such as
  • HPI, RMCP+, SNMP, CLI, HTTP, HPM, E-Keying, etc.

Download Datasheet Add to Info Request

add to compare
0

The VT002 incorporates the Intelligent Platform Management Interface (IPMI Version 2.0) and the PICMG 3.x specification on a mezzanine module. The VT002 is VadaTech next generation shelf manager product. It provides a complete IPMI hardware and software solution in the size of a credit card and dissipates less than 3W.

The VT002 is deployed on any custome management carriers (i.e. VadaTech VT004, VT005, VT006, VT007 or VT008) for the rapid development of dedicated Shelf Managers. The VT002 can also be configured to run as a Shelf Manager on an ATCA module (such as the VadaTech ATC800, ATC120, ATC109, etc.). This allows the ATCA module itself to replace the dedicated Shelf Manager, thereby reducing overall system cost.

If configured as a Node (such as the VadaTech ATC104), it can manage up to 8 AMC modules .

The VT002 is mated to the host/carrier board through a dual source connector (Tyco/Samtec). A choice in connector height allows the flexibility to place components underneath the VT002.

Key Features
  • 32-bit RISC processor @ 400 MHz
  • 64 Mbytes of DDR @ 266Mhz
  • 128 Mbytes of flash
  • 32KByte FRAM for log messages
  • Form, fit, functional to VadaTech VT001 first generation product
  • Firmware is field upgradable with dual boot
  • Dual 10/100 Ethernet ports
  • Three RS-232 ports
  • Linux release 2.6.21
  • IPMI 2.0 compliant
  • Low power (3W)
  • RTC with 10 year battery life span
  • Runs as the Shelf Manager and/or Node
  • Each I2C bus has a 128-byte FIFO
  • Rich set of management software such as
  • HPI, RMCP+, SNMP, CLI, HTTP, HPM, E-Keying, etc.
Benefits
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications Related Products

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT000

ATCA Power Module

  • Powers a single ATCA module
  • IPMI hardware address and parity
  • Fuse on each of the power rails
  • Enable switch
  • Connector for IPMI Bus A and B
  • Allows connection to shelf managers (such as VadaTech’s bench-top style VT007)
  • Test points
  • RoHS compliant
View product VT000 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.