AMC583

FPGA Carrier with Dual FMC+, Kintex UltraScale™ XCKU115 with P2040, AMC

  • Xilinx UltraScale™ Kintex XCKU115 QorIQ PPC2040
  • AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE, 40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Clock jitter cleaner
  • 8 GB of DDR4 (two banks)
  • Double module, mid-size AMC (full-size optional)
  • IPMI 2.0 compliant

Download Datasheet Add to Info Request

add to compare

The AMC583 provides a very capable I/O processing engine, with a large UltraScale™ FPGA coupled to two FMC+ sites and supported by an onboard quad-core P2040 processor. The FPGA has over 5,500 DSP slices and is supported by 8 GB of DDR4 (32-bits wide over two banks) enabling larger buffer sizes while processing and queuing data to the host. The XCKU115 connects to all FMC+ LA/HA/HB pairs, DP00 to DP23 (HSPCe connection not supported), balancing high-speed I/O with impressive processing power.

The AMC583 is compliant to the AMC.1, AMC.2 and/or AMC.4 specification, and optionally supports direct AMC-to-AMC connections over Ports 12-15 and 17-20.

The quad core P2040 onboard host has x4 PCIe interface to the FPGA in addition to its local bus, and is supported by DDR3, Boot Flash and an SD Card. The user can route Ports 0 and 1 to either the PPC or the FPGA.

The dual FMC+ sites accept FMCs from VadaTech’s extensive range of data acquisition, networking and RF units, and other 3rd party VITA 57.4 compliant modules.

The AMC583 has Serial Over LAN (SOL) per IPMI specification, with a hardware RNG for secure session.

 

Key Features
  • Xilinx UltraScale™ Kintex XCKU115 QorIQ PPC2040
  • AMC Ports 4-11 are routed to FPGA per AMC.1,AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 10GbE, 40GbE, etc. are FPGA programmable)
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Clock jitter cleaner
  • 8 GB of DDR4 (two banks)
  • Double module, mid-size AMC (full-size optional)
  • IPMI 2.0 compliant
Benefits
  • Xilinx UltraScale™ XCKU115 FPGA provides strong connectivity and processing power
  • Dual FMC+ sites with broad choice of compatible network, A/D, D/A and RF FMCs
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC725

Xeon E3 Processor, 10GbE, MTCA.4, Double Module, AMC

  • Double-module, mid-size per AMC.0 and MTCA.4
  • Intel® Xeon E3 processor options with PCH
  • DVI graphics (SM750 w/ 16 MB DDR) up to 1920x1440 resolution
  • PCIe Gen3 on ports 4-7 and 8-11 or single PCIe x8 on ports 4-11 (AMC.1)
  • GbE on ports 0 and 1 (AMC.2) and SATA on ports 2 and 3 (AMC.3)
  • PCIe Gen3 x8, dual SATA and quad USB to RTM
  • Dual 10GbE via SPF+ and dual GbE via RJ-45 to front panel
View product AMC725 Data Sheet

UTC004

3rd Gen MicroTCA Carrier Hub (MCH), 40GbE/PCIe Gen 3

  • Unified 1 GHz quad-core CPU for MCMC (MicroTCA Carrier Management Controller), Shelf Manager, Clocking, and Fabric management
  • Automatic fail-over with redundant UTC004s
  • 1GbE base switch with dual 100/1000/10G uplink
  • Full Layer 2 or 3 managed Ethernet switches
  • Non-blocking PCIe Gen 3, SRIO Gen 2, 10GbE/40GbE, or Crossbar Switch option to AMC fat pipes with options for up to 40GbE uplink
  • Low-jitter M-LVDS clock distribution crossbar matrix
  • PLL synthesizer for generating any clock frequency disciplined to GPS/SyncE/IEEE1588
  • Single module, full size per AMC.0
View product UTC004 Data Sheet

VT892

7U uTCA Chassis, 12 AMC, Bottom to Top Cooling

  • 7U μTCA System Platform
  • 19” x 7U x 10.5” deep (with handles 12” deep)
  • Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and dual Power Modules
  • Up to twelve AMCs: 12 full size double module
  • Radial I2C bus to each AMC
  • Dual Star passive 26 layer backplane
  • Redundant FRU information devices and carrier locator
  • 1000W AC Power supply option
  • Telco Alarm
  • CLK1, CLK2 and CLK3
  • JTAG Switch Module (JSM) Slot
  • ESDJack at the top front
  • Cooling from bottom to top
View product VT892 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.