Dual DisplayPort (DP) Source/Sink, with USB 3.0 and QSFP28

  • Dual Display port (Source and Sink)
  • Support for source DP1.3 and eDP1.4
  • Support for sink DP1.4a
  • USB 3.0 Type C
  • QSFP28
  • Onboard Wideband PLL to setup any clock frequency

Download Datasheet Add to Info Request

add to compare

The FMC110 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard. DisplayPort source, DisplayPort sink, USB +3.0. and a QSFP+ port is all incorporated within the unit’s small footprint.

The DisplayPort source has a quad channel linear redrive on the front end that supports data rates of up to 12Gbps, including DisplayPort RBR, HBR, HBR2 and HBR3.

The DisplayPort sink has a DP1.4a repeater on the front end that supports rates of up to 8.1Gbps.

The module brings in the AUX Channels of the DP for both the Source and the Sink ports.

The QSFP28 has a Multi-rate retimer and Signal Conditioning on the front end. Each channel locks independently up to 28.4 Gbps with an adaptive Decision Feedback Equalizer (DFE).

The FMC110 has a low jitter PLL (Jitter performance


Key Features
  • Dual Display port (Source and Sink)
  • Support for source DP1.3 and eDP1.4
  • Support for sink DP1.4a
  • USB 3.0 Type C
  • QSFP28
  • Onboard Wideband PLL to setup any clock frequency
  • Single module to provide multiple I/O
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications Related Products


Dual ADC @ 10.4 or 6.4 GSPS and Dual DAC @ 12 GSPS, UltraScale, AMC

  • Xilinx UltraScale™ XCKU115 FPGA
  • Dual ADC 12-bit @ 10.4/6.4 GSPS or quad ADC @ 5.2/3.2 GSPS with TI ADC12DJ5200 or ADC12DJ3200
  • Option for ADC12DJ5200, ADC12DJ3200 or ADC12DJ2700
  • Dual DAC 16-bit @12 GSPS (AD9162 or AD9164)
  • Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC599 Data Sheet


70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet


1U Rugged Chassis Platform with 6 AMC Slots, PCIe Gen 3 and Dual PSU

  • MicroTCA rugged 1U 19” rackmount chassis platform
  • Designed to meet MIL-STD-810F, MIL-STD-901D for shock/vibration
  • Compliant to MIL-STD-461E for EMI
  • Supports up to six single mid-size modules
  • Full Layer 2 or 3 managed Ethernet switch
  • Dual x4 or single x8 PCIe Gen 3 per AMC slot
  • Chassis accepts AMCs with single retention screw opposite of ejector handle on each slot
  • Management can run as Shelf/MCMC or MicroTCA Carrier Management Controller (MCMC)
  • Dual redundant PSUs located in the rear of the chassis
  • AMC.1, AMC.2, AMC.3 and AMC.4 compliant
  • Front to back airflow
View product VT951 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.