MicroTCA.4 RTM for AMC520
- MicroTCA.4 RTM for the AMC520
- Two analog outputs from AMC520’s DACs via SSMC connectors
- Ten analog inputs (AC or DC coupled) interfacing directly with AMC520’s ADC ICs via SSMC connectors
- Twelve LVDS signals and three differential reference clock routing to AMC520’s FPGA
- LVDS and reference clocks accessible via dual high density DensiShield connectors
- Double module, mid-size (full-size optional)
- RoHS compliant
Download Datasheet Add to Info Request
add to compare
The MRT520 is a Rear Transition Module (RTM) for VadaTech’s AMC520 10-channel ADC. The board uses SSMC connectors for the analog input and output interface. Dual high-density DensiShield connectors are used for the LVDS and reference clocks.
Each of the 10 channels of the MRT520 are routed to the front module (AMC520) via the DC or AC inputs of the AMC520 (the module has AC or DC input options to each of the A/D). The AC or DC input are selected via the zero ohms resistors that customers can change in the field.
The Analog Input Signal is field selectable for direct or 1, 2,+/- 5, +/-10 VDC. The Analog Output Signal is 10 VDC.
VadaTech offers a wide range of MicroTCA.4 products, including full systems. Contact your local salesperson or representative for details.
Key Features
- MicroTCA.4 RTM for the AMC520
- Two analog outputs from AMC520’s DACs via SSMC connectors
- Ten analog inputs (AC or DC coupled) interfacing directly with AMC520’s ADC ICs via SSMC connectors
- Twelve LVDS signals and three differential reference clock routing to AMC520’s FPGA
- LVDS and reference clocks accessible via dual high density DensiShield connectors
- Double module, mid-size (full-size optional)
- RoHS compliant
Benefits
- Expertise in RTM and MTCA.4 board design
- Full ecosystem of MicroTCA.4 AMCs, PMs, MCH, RTMs, chassis, and application-ready systems
- Design utilizes proven VadaTech subcomponents and engineering techniques
- Electrical, mechanical, software, and system-level expertise in house
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC520
AMC 10-channel ADC, MicroTCA.4
- Double module AMC, compliant to μTCA.4
- Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
- Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
- Internal clock or precision external clock from RTM/backplane/front panel clocks
- Trig in/out configurable by software (external trigger via front or port 17)
- Backplane PCIe Dual x4 or x8/Dual GbE
- Xilinx Virtex-6 FPGA in FF1759 package
- Option for QDR-II+
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- Dual SFP+ (up to 6.6Gbps)
- JTAG selectable front and backplane
- AMC.1 and AMC.2 (FPGA programmable)
View product
AMC520 Data Sheet
UTC018
AC Power Module, 1000W
- Double-module, 12HP size module per AMC.0
- Universal AC input (85 to 265V), 1000W
- Provides power up to 12 AMCs, 2 MCHs and Cooling Units
- Very low ripple voltage on +12V
- Hot swappable with two banks of 256K flash for redundancy
- Dual IPMI bus
- 32–bit RISC processor
View product
UTC018 Data Sheet
VT811
8U uTCA.4 Chassis Platform
- uTCA.4 Chassis Platform with rear I/O
- 19” x 8U x 14.9” deep (with handles 16.23” deep)
- Full redundancy with dual MicroTCA Carrier Hub (MCH), dual Cooling Units and quad Power Modules
- Up to twelve AMCs: 12 mid-size double module front module with 12 mid-size double module RTMs
- Provision to route cables from the front to the back
- Radial I2C bus to each AMC
- High-speed 30 layer passive backplane
- Redundant FRU information devices and carrier locator
- Dual 1000W AC Power supply option Telco Alarm FCLKA, TCKA, TCKB, TCLKC AND TCLKD
- JTAG Switch Module (JSM) Slot
- ESD Jack at the top front
View product
VT811 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
