μTCA.4 Kintex-7 Data Processing AMC (TCK7)

LEGACY *
  • Data Processing AMC in double module, mid-size (full-size optional)
  • Compliant to MicroTCA.4
  • Class D1.2 compatible
  • High-speed Kintex-7 FPGA
  • 16 GB DDR3 SDRAM
  • Octal SFP+ via the front panel
  • PCIe x4 Gen 3
  • Two channels of GbE
  • Ten direct low latency connections to backplane
  • Four low latency connections to RTM
  • LVDS parallel bus to RTM
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging

Download Datasheet Add to Info Request

add to compare
0

The CM045 (TCK7) AMC-based Controller board is a general purpose high-performancelow-latency data processing unit designed according to the PICMG MTCA.4 specifications.The module provides processing power, data memory, communication links and referenceclock signals. The CM045 is ideal for LLRF (Low Level Radio Frequency) cavity fieldstabilizing control for standing-wave linear accelerators, as well as other applicationsrequiring low latency and high speed digital signal processing.

The FPGA on the CM045 supports eight SFP+ ports (up to 10 GbE) on the front panel. Italso routes 4 low latency MGT Links and 38 LVDS I/O signals to the Rear Transition Module(RTM) Zone 3 connector. Since the control algorithms could be improved with time, thedevice supports in-system firmware upgrade, using IPMI and a fast serial link.

Key Features
  • Data Processing AMC in double module, mid-size (full-size optional)
  • Compliant to MicroTCA.4
  • Class D1.2 compatible
  • High-speed Kintex-7 FPGA
  • 16 GB DDR3 SDRAM
  • Octal SFP+ via the front panel
  • PCIe x4 Gen 3
  • Two channels of GbE
  • Ten direct low latency connections to backplane
  • Four low latency connections to RTM
  • LVDS parallel bus to RTM
  • Partial reconfiguration and firmware upgrade support
  • Advanced diagnostic, monitoring and debugging
Benefits
  • High performance Kintex-7 FPGA
  • High end stabilizing control with powerful digital signalprocessing capability
  • Compatible with application-specific Class D1.2 RTMs
  • Low latency, with multiple front and RTM connections
  • Electrical, mechanical, software, and system-levelexpertise in house
  • Full ecosystem of front and rear boards, enclosures,specialty modules, and test/dev products from onesource
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC520

AMC 10-channel ADC, MicroTCA.4

  • Double module AMC, compliant to μTCA.4
  • Ten channel of ADC with 125MSPS @ 16-bit resolution utilizing AD9268 device
  • Dual DAC with 250 MSPS @ 16-bit resolution utilizing MAX5878 device (this is user programmable for lower sampling rate)
  • Internal clock or precision external clock from RTM/backplane/front panel clocks
  • Trig in/out configurable by software (external trigger via front or port 17)
  • Backplane PCIe Dual x4 or x8/Dual GbE
  • Xilinx Virtex-6 FPGA in FF1759 package
  • Option for QDR-II+
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Dual SFP+ (up to 6.6Gbps)
  • JTAG selectable front and backplane
  • AMC.1 and AMC.2 (FPGA programmable)
View product AMC520 Data Sheet

VT812

2U MicroTCA.4 Chassis with 8 AMCs

  • 19” x 2U x 14.2” deep chassis with redundant MCH, Power Modules and integrated Cooling Units
  • Supports a mix of MTCA.0 and MTCA.4 AMCs
  • 26-layer backplane
  • High speed MTCA connectors (12.5 GHz)
  • Radial I2C bus to each AMC and telco alarm
  • JTAG Switch Module (JSM) slot for programming/debugging with front port access
  • TCLKA, TCLKB, TCLKC, TCLKD and FCLKA
  • Removable Air Filter, Power Module and Fan Tray
  • Single or dual 500W AC Universal Power Module or dual 796W DC module
  • ESD jack
  • IPMI 2.0 compliant
View product VT812 Data Sheet

VT813

8U uTCA.4 Chassis Platform, (3+1) 4400W

  • μTCA.4 Chassis Platform with rear I/O
  • 19” x 8U x 14.9” deep (with handles 16.23” deep)
  • Full redundancy with dual MicroTCA Carrier Hubs (MCH), dual cooling units and quad PSUs
  • Up to twelve AMCs: 12 mid-size double modules in front with 12 mid-size, double-module in the rear
  • Provision to route cables from the front to the back
  • Radial I2C bus to each AMC
  • High-speed 30 layer passive backplane (40GbE ready)
  • Redundant FRU information devices and carrier locators
  • Four 1.1 kW AC Power supply for 4.4 kW total
  • Telco aarm
  • FCLKA, TCKA, TCKB, TCLKC AND TCLKD
  • JTAG Switch Module (JSM) Slot
  • ESD Jack at the top front and back
View product VT813 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications. Call VadaTech for more Information.