FMC156
- (similar products)
- FMC111 - Single SERDES Input/Output with Clock Input
- FMC155 - Multi I/O FMC Module, M-LVDS, RS-485/422, Single-ended +3.3V
- FMC157 - Multi I/O FMC Module, Differential Input, LVDS with Isolated Output
- FMC151 - Multi I/O FMC Module, ECL or NECL Input/Output, RS-422 and Fiber Optics
- FMC161 - ARINC-429, ARINC-717, CAN Bus, Serial Sync and Discrete I/O
- FMC162 - MIL-STD-1553A/B
Multi I/O FMC Module, M-LVDS, RS-485/422, GPIO +3.3V/+5V
- Multiple I/O in single FMC form-factor
- M-LVDS, RS-485/RS-422, and singled-ended +3.3V/+5V
- 8x M-LVDS input/outputs with speed up to 350 MHz and programmable crossbar circuit routing
- 16x RS-485 or 8 x RS-422 with speed up to 50 Mbps
- Programmable termination per Port for RS-485/RS-422
- 12x GPIO as +3.3V or +5V
Download Datasheet Add to Info Request
add to compare
The FMC156 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard, offering a small footprint and allowing for general-purpose I/O expansion.
The FMC156 provides eight M-LVDS input/outputs, sixteen RS-485 or eight RS-422 (per Port configurable), and twelve single-ended +3.3V/+5V GPIO.
The M-LVDS signals go through a Cross Bar Switch (CBS), which allows input/output routing within each group of eight M-LVDS signals. Each CBS port can be individually software-configured for routing, termination, and direction.
Each of the single-ended Ports can be configured as input or output and the I/O can be programmed to be either +3.3V or +5V (GPIO as a group are configured as +3.3V or +5V). The RS-485/422 configuration can be selected as full-duplex RS-422 (independent RX/TX pairs with RX termination) or half-duplex RS-485. If all Ports are configured as RS-422 only eight Ports are available. Each RX is programmable for termination.
The FMC156 can provide power of up to 12W to an external module.
Key Features
- Multiple I/O in single FMC form-factor
- M-LVDS, RS-485/RS-422, and singled-ended +3.3V/+5V
- 8x M-LVDS input/outputs with speed up to 350 MHz and programmable crossbar circuit routing
- 16x RS-485 or 8 x RS-422 with speed up to 50 Mbps
- Programmable termination per Port for RS-485/RS-422
- 12x GPIO as +3.3V or +5V
Benefits
- Single module to provide multiple I/O
- Utilizing commercially-available, standard high-density connector for ease of cabling
- All I/O types utilize differential signaling between the transceivers on the FMC and the FPGA on the carrier for optimal signal integrity across the FMC connector
- Programmable M-LVDS termination and routing
- Electrical, mechanical, software, and system-level expertise in house
- Full system supply from industry leader
- AS9100 and ISO9001 certified company
Specifications
Block diagram
Related Products
AMC599
Dual ADC @ 10.4 or 6.4 GSPS and Dual DAC @ 12 GSPS, UltraScale, AMC
- Xilinx UltraScale™ XCKU115 FPGA
- Dual ADC 12-bit @ 10.4/6.4 GSPS or quad ADC @ 5.2/3.2 GSPS with TI ADC12DJ5200 or ADC12DJ3200
- Option for ADC12DJ5200, ADC12DJ3200 or ADC12DJ2700
- Dual DAC 16-bit @12 GSPS (AD9162 or AD9164)
- Two banks of 64-bit wide and a single bank of 32-bit wide DDR4 for a total of 20 GB
- AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
- AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
- Clock jitter cleaner
- IPMI 2.0 compliant
View product
AMC599 Data Sheet
FMC214
70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC
- Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
- Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
- MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
- Supported by DAQ Series™ data acquisition software
- FPGA Mezzanine Card (FMC) per VITA 57
- Multiplexed 2x RF inputs on each RF channel
- On-board clocking with multi-card synchronization capability
- Low Pin Count (LPC) 160-pin connector
View product
FMC214 Data Sheet
VT951
1U Rugged Chassis Platform with 6 AMC Slots, PCIe Gen 3 and Dual PSU
- MicroTCA rugged 1U 19” rackmount chassis platform
- Designed to meet MIL-STD-810F, MIL-STD-901D for shock/vibration
- Compliant to MIL-STD-461E for EMI
- Supports up to six single mid-size modules
- Full Layer 2 or 3 managed Ethernet switch
- Dual x4 or single x8 PCIe Gen 3 per AMC slot
- Chassis accepts AMCs with single retention screw opposite of ejector handle on each slot
- Management can run as Shelf/MCMC or MicroTCA Carrier Management Controller (MCMC)
- Dual redundant PSUs located in the rear of the chassis
- AMC.1, AMC.2, AMC.3 and AMC.4 compliant
- Front to back airflow
View product
VT951 Data Sheet
Info request
Create a list of products to inquire about for more information or quote request.
