ATCA Carrier for Two PCI-X Modules

LEGACY *
  • AdvancedTCA 3.0 Release 2.0 compliant
  • Supports two PCI-X edge style cards
  • 64-bit @ 133MHz
  • Dedicated PCI-X bus for each slot
  • PCIe up/downstream to ATC103/104/105/106/107/108, PCI103 or AMC103 via the front or rear
  • Adjustable hold down brackets
  • IPMI Version 2.0 compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks

Download Datasheet Add to Info Request

add to compare
0

The ATC108 is an Advanced Telecom Computing Architecture (AdvancedTCA) carrier which allows for the integration of two PCI-X cards into the AdvancedTCA environment. The two PCI-X slots are independent and can run at different speeds. The  ATC108 has a PCIe up/downport to interface to other Blades or VadaTech products, such as the ATC103/104/105/106/107/108, PCI103 or AMC103. This modular approach allows widely available PCI-X form factor boards to be integrated into an ATCA chassis. 

The ATC108 can be configured as a Shelf Manager or a Node board. As a Shelf Manager, the ATC108 eliminates the need for other shelf managers which reduces the total system cost. The shelf manager implements IPMI management, FRU management, and shelf environment management for power, thermal, E-keying, etc.  

Key Features
  • AdvancedTCA 3.0 Release 2.0 compliant
  • Supports two PCI-X edge style cards
  • 64-bit @ 133MHz
  • Dedicated PCI-X bus for each slot
  • PCIe up/downstream to ATC103/104/105/106/107/108, PCI103 or AMC103 via the front or rear
  • Adjustable hold down brackets
  • IPMI Version 2.0 compliant
  • OS support for:
    • Linux
    • Windows
    • Solaris
    • VxWorks
Benefits
  • Shelf management functionality included
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level
     expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

ATC118

ATCA Carrier for Two PCI-X Modules

  • AdvancedTCA 3.0 Release 2.0 compliant
  • Supports two PCI-X edge style cards
  • 64-bit @ 133 Mhz
  • Dedicated PCI-X bus for each slot
  • PCIe up/downstream to ATC114/ATC115/ATC/ATC117/118, PCI113 or AMC113 via the front or rear
  • Adjustable hold down brackets to hold the PCI module down
  • PCIe Front panel up/down stream via QSFP (Copper or Fiber cable)
  • IPMI Version 2.0 compliant
  • OS Independent
View product ATC118 Data Sheet

ATC800

48-Port GbE with 10-GbE Uplink Switch

  • AdvancedTCA open standard form factor
  • Linux operating system
  • Open Architect™ firmware 
  • Run as the Shelf Manager or Node board
  • Five front panel 10/100/1000Base-T ports
  • Nine front panel SFP ports
  • Front panel XFP egress port for 10GbE
  • GbE to Base Interface for 14 payload slots and Shelf Manager
  • Eighteen GbE ports to Zone 3 for use with an RTM
  • 10GbE Inter-Switch Link for fail-over via Zone2 fabric channel
  • PICMG 3.1 compliant
  • IEEE 802.3 compliant
  • IPMI Version 2.0 compliant
View product ATC800 Data Sheet

VT830

6U ATCA SlotSaver Chassis with Dual Switching Shelf Managers

  • 19" rackmount 6U ATCA Chassis with integrated Switch and Shelf Manager
  • 10GbE/GbE Managed Layer 2
  • 40GbE/10GbE/GbE Managed Layer 3
  • 100G, 40G or 10G ATCA 6-slot backplane with Dual Star base and fabric (Full Mesh)
  • Split power distribution (odd slots on A1/B1,even slots on A2/B2)
  • Redundant Power supplies AC (DC or AC/DC optional)
  • Up to four AC supply at 1300W each (N+1)
  • 6 Rear Transition Module (RTM) slots
View product VT830 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.

* Legacy product only – not recommended for new applications. Call VadaTech for more Information.