HDMI Sink/DisplayPort Source with USB 3.0 and QSFP28

  • HDMI Sink
  • Display port Source
  • USB 3.0 Type C
  • QSFP28
  • Onboard Wideband PLL to set up any clock frequency

Download Datasheet Add to Info Request

add to compare

The FMC114 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard. HMDI source, DisplayPort sink, USB +3.0, and a QSFP+ port are all incorporated within the unit’s small footprint.

The HDMI sink has a 6 GSPS Clock Data Recovery (CDR). The input supports 4K2K60FPS and up to WUXGA 16-bit color depth or 1080p with higher refresh rate.

The DisplayPort sink has a DP1.4a repeater on the front end that supports rates of up to 8.1 Gbps.  The module brings in the AUX Channels of the DP.

The QSFP28 has a multi-rate re-timer and Signal Conditioning on the front end. Each channel locks independently up to 28.4 Gbps with an adaptive Decision Feedback Equalizer (DFE).

The FMC114 has a low jitter PLL (jitter performance

Key Features
  • HDMI Sink
  • Display port Source
  • USB 3.0 Type C
  • QSFP28
  • Onboard Wideband PLL to set up any clock frequency
  • Single module to provide multiple I/O
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company

Block diagram

Related Products


Zynq UltraScale+ FPGA, FMC+ Carrier, AMC

  • Xilinx UltraScale+ XCZU19EG FPGA
  • Single FMC+ (VITA 57.4) site
  • 8 GB of 64-bit wide DDR4 Memory (single bank) with ECC (CPU)
  • 8 GB of 64-bit wide DDR4 Memory (single bank, FPGA)
  • MPSoC with block RAM and UltraRAM
  • SD Card (option)
  • 128 MB of boot Flash
  • 64 GB of user Flash
View product AMC585 Data Sheet


70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet


FPGA/FMC Carrier, Kintex UltraScaleā„¢, 3U VPX

  • 3U FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46 and VITA 57
  • Xilinx Kintex UltraScale™  XCKU115 FPGA
  • High-performance clock jitter cleaner
  • VHDL reference design with source code
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable
  • Compatible with VadaTech and 3rd party FMCs
  • 20 GB of DDR4 Memory (2 banks of 64-bit wide, and single bank of 32-bit wide)
  • Health Management through dedicated Processor
View product VPX592 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.