FMC211

FMC High-speed ADC 10-bit at 2.6 GSPS Module

  • FPGA Mezzanine Card (FMC) per VITA-57
  • ADC EV10AS150B  @ 2.6 GSPS
  • 5 GHz Full Power Input Bandwidth (–3dB)
  • True single core architecture (no calibration required)
  • Full scale Analog input Voltage Span 500 mVpp
  • Ultra Low Jitter wideband PLL Synthesizer
  • Option for Direct RF clock sampling or  reference clock input
  • The ADC RF input can be differential or single ended

Download Datasheet Add to Info Request

add to compare
0

The FMC211 is an FPGA Mezzanine Card per VITA 57 specification with a high speed ADC.

The ADC converter utilizes the e2v part number EV10AS150B device which has a high linearity ADC. The module has an ultra-low jitter wideband PLL Synthesizer for sampling.

The Modules allows the RF input signal to be differential or single ended. With singled ended signal there is a Balun with the Freq range from 500KHz to 6GHz. The module could also be ordered with differential input which will not have the Balun installed.

The front panel RF clock is a reference input clock to the PLL or it could input to the ADC direct sampling clock. The PLL can also receive its reference clock from an on board or the FMC Carrier.

The Module has 4 GPIO as differential input/output. The Differential input/output can be configured as single ended. 

Key Features
  • FPGA Mezzanine Card (FMC) per VITA-57
  • ADC EV10AS150B  @ 2.6 GSPS
  • 5 GHz Full Power Input Bandwidth (–3dB)
  • True single core architecture (no calibration required)
  • Full scale Analog input Voltage Span 500 mVpp
  • Ultra Low Jitter wideband PLL Synthesizer
  • Option for Direct RF clock sampling or  reference clock input
  • The ADC RF input can be differential or single ended
Benefits
  • Array of FMC’s and FMC carriers available from VadaTech
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC516

Virtex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA-57
  • Xilinx Virtex-7 690T FPGA in FFG-1761 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC516 Data Sheet

AMC532

Altera Carrier for FMC, Stratix® V (5SGXEA)

  • Single module, mid-size or full-size
  • AMC FPGA based on Altera Stratix® V (5SGXEA) in F1932 package
  • VITA 57.1 FMC HPC Connector (compatible with LPC)
  • AMC Ports 0-15, 17-20 and FMC Ports DP0-9 are routed for high speed SERDES protocols
  • All FMC LA, HA, HB pairs routed bi-directionally
  • High-speed SERDES protocols such as PCIe x4, SRIO, XAUI, 1000Base-X are FPGA programmable
  • Onboard PLL for buffering/multiplying and jitter cleaner (Stratum-3)
  • M-LVDS/LVDS Clock crossbar switch for flexible clock routing
  • 4 GB of DDR3 memory to FPGA (4 channels x 1 GB each)
  • Serial Over LAN (SOL) with hardware RNG
View product AMC532 Data Sheet

FMC109

FMC QUAD SFP/SFP+ for GbE/10GbE

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Quad SFP/SFP+ cages for quad ports
  • Re-driver on all four ports for a better signal quality
  • RoHS compliant
View product FMC109 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.