FMC229

FMC Quad DAC 16-bit @ 2.8 GSPS with Quadrature Modulator

  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single DAC39J84
    • Quad DAC16-bit @ 2.8 GSPS
    • JESD204B
    • Wideband Digital Quadrature Modulator Correction
    • Digital Summation of Independent Complex Signals
    • Independent Complex Mixer with 48-bit NCO or +/-nxFs/8
    • Selectable 1x-16x Interpolation
  • On board dual Wideband Quadrature Modulator
  • Trig In/Output
  • RoHS compliant

Download Datasheet Add to Info Request

add to compare
0

The FMC229 is an FPGA Mezzanine Card (FMC) per VITA 57 specification. The boardutilizes TI DAC39J84 with Quad DAC at 16-bit @ 2.8 GSPS.

The module has a dual high performance broadband I/Q modulator with a fractional-N PLLand low noise multicore VCO’s. The baseband inputs mix with the Local Oscillator (LO)generated internally or provided externally, and convert it to a single ended RF. TheFMC229 allows both internal and external LO signals for the mixers. The internal LO isgenerated by an on-chip VCO. The front panel also has Trig In/Out and CLK In ports.

  • General output LO range: 256.25 MHz to 4100 MHz (based on internal orexternal VCO)
  • External VCO input frequency range: 250 MHz to 4200 MHz (-10 dBm to+10 dBm)
  • A cut-off frequency of 650 MHz of the low pass filter on I and Q providing amaximum analog bandwidth of 1300 MHz (limited to 200 MHz with LO frequencyat 4100 MHz)
  • Typical RF output between 400 MHz to 4200 MHz.
Key Features
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Single DAC39J84
    • Quad DAC16-bit @ 2.8 GSPS
    • JESD204B
    • Wideband Digital Quadrature Modulator Correction
    • Digital Summation of Independent Complex Signals
    • Independent Complex Mixer with 48-bit NCO or +/-nxFs/8
    • Selectable 1x-16x Interpolation
  • On board dual Wideband Quadrature Modulator
  • Trig In/Output
  • RoHS compliant
Benefits
  • Array of FMC’s and FMC carriers available from VadaTech\
  • Design utilizes proven VadaTech subcomponents and engineering techniques
  • Electrical, mechanical, software, and system-level expertise in house
  • Full ecosystem of front and rear boards, enclosures, specialty modules, and test/dev products from one source
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC516

Virtex-7 FPGA Carrier for FMC, AMC

  •  AMC FPGA carrier for FMC per VITA-57
  • Xilinx Virtex-7 690T FPGA in FFG-1761 package with optional P2040
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, XAUI, etc. are FPGA programmable)
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
  • Single module, mid-size AMC (full-size optional)
  • Clock jitter cleaner
  • IPMI 2.0 compliant
View product AMC516 Data Sheet

AMC532

Altera Carrier for FMC, Stratix® V (5SGXEA)

  • Single module, mid-size or full-size
  • AMC FPGA based on Altera Stratix® V (5SGXEA) in F1932 package
  • VITA 57.1 FMC HPC Connector (compatible with LPC)
  • AMC Ports 0-15, 17-20 and FMC Ports DP0-9 are routed for high speed SERDES protocols
  • All FMC LA, HA, HB pairs routed bi-directionally
  • High-speed SERDES protocols such as PCIe x4, SRIO, XAUI, 1000Base-X are FPGA programmable
  • Onboard PLL for buffering/multiplying and jitter cleaner (Stratum-3)
  • M-LVDS/LVDS Clock crossbar switch for flexible clock routing
  • 4 GB of DDR3 memory to FPGA (4 channels x 1 GB each)
  • Serial Over LAN (SOL) with hardware RNG
View product AMC532 Data Sheet

FMC109

FMC QUAD SFP/SFP+ for GbE/10GbE

  • FPGA Mezzanine Card (FMC) per VITA-57
  • Single module
  • Quad SFP/SFP+ cages for quad ports
  • Re-driver on all four ports for a better signal quality
  • RoHS compliant
View product FMC109 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.