FMC252

Dual Channel DC to 9GHz Vector Signal Generator based on AD9166 FMC+

  • FMC+ module per VITA57.4
  • Dual Analog Devices AD9166
  • Fully synchronize dual DAC
  • 16-bit with update rate of 12GSPS
  • DC to 9GHz in 2x NRZ mode
  • DC to 2.5GHz in Baseband mode
  • The quadrature DDS has digital upconverter
  • Signal reconstruction up to 9Ghz
  • Excellent dynamic range
  • Front panel interface includes CLK In, Trig In and Trig Out

Download Datasheet Add to Info Request

add to compare

The FMC252 is an FMC+ per VITA 57.4 specification. The board has a dual channel DAC based on Analog Device AD9166. The two DAC are synchronized with respect to the RF clock inputs.

The AD9166 features:

  • DC to 9GHz Vector Signal Generator
  • Up to 4dBm output power
  • 16-bit with core update rate up to 12GSPS
  • DC to 2.5GHz in baseband mode
  • DDS as digital upconverter

The module has Trig In/Out as well as clock input for external synchronizing.

See VadaTech ADI Offerings for the advantages of using our products during application development.

Key Features
  • FMC+ module per VITA57.4
  • Dual Analog Devices AD9166
  • Fully synchronize dual DAC
  • 16-bit with update rate of 12GSPS
  • DC to 9GHz in 2x NRZ mode
  • DC to 2.5GHz in Baseband mode
  • The quadrature DDS has digital upconverter
  • Signal reconstruction up to 9Ghz
  • Excellent dynamic range
  • Front panel interface includes CLK In, Trig In and Trig Out
Benefits
  • High dynamic range for versatility
  • Ideal for Broadband communications systems, Wireless infrastructure, LTE, ATE, RADAR/Jamming
  • Compatible with a broad range of Xilinx- and Intel/Altera-based FMC carriers from VadaTech and others
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VPX592

FPGA/FMC Carrier, Kintex UltraScaleā„¢, 3U VPX

  • 3U FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46 and VITA 57
  • Xilinx Kintex UltraScale™  XCKU115 FPGA
  • High-performance clock jitter cleaner
  • VHDL reference design with source code
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable
  • Compatible with VadaTech and 3rd party FMCs
  • 20 GB of DDR4 Memory (2 banks of 64-bit wide, and single bank of 32-bit wide)
  • Health Management through dedicated Processor
View product VPX592 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.