FMC253

FMC 12 GSPS DAC, Dual 2.6 GSPS ADC, 250 MSPS ADC

  • ADC dual channel 14-bit @ 2.6 GSPS (AD9689)
  • DAC 16-bit @ 12 GSPS (AD9164/AD9162)
  • ADC 16-bit @ 250 MSPS (AD9467)
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Front panel interface includes Trig In/Out
  • Clock input for synchronization via front or rear

Download Datasheet Add to Info Request

add to compare

The FMC253 is an FMC per VITA 57 specification. The unit utilizes the following components to provide dual channel high-speed ADC, single channel high-speed DAC and single channel low-speed ADC:

  • AD9689 for dual channel ADC providing 14-bit conversion rates of up to 2.6 GSPS
  • AD9164 (option for AD9162) for DAC 16-bit conversion rates of up to 12 GSPS
  • AD9467 to offer an additional ADC channel providing 16-bit conversion at up to 250 MSPS

The FMC253 is identical to the FMC251 except with respect to clocking. The FMC253 clocks the high-speed DAC/ADC with the same PLL clock. Although the high-speed DAC is capable of running at a faster clock rate, the FMC253 allows the highest clock rate dictated by the ADC9689. The FMC253 also has a jitter cleaner on the clock input of the low speed AD9467 to provide a much lower jitter clock.

The unit provides a Trigger Input/Output, clock and all analog Input/Output via SSMC connectors.

Key Features
  • ADC dual channel 14-bit @ 2.6 GSPS (AD9689)
  • DAC 16-bit @ 12 GSPS (AD9164/AD9162)
  • ADC 16-bit @ 250 MSPS (AD9467)
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Front panel interface includes Trig In/Out
  • Clock input for synchronization via front or rear
Benefits
  • High dynamic range for versatility in video/broadcast requirements
  • Ideal for Broadband communications systems, Wireless infrastructure, LTE, ATE, RADAR/Jamming
  • Compatible with a broad range of Xilinx- and Altera-based FMC carriers from VadaTech and others
  • Electrical, mechanical, software, and system-level expertise in house
  • Full system supply from industry leader
  • AS9100 and ISO9001 certified company
Specifications
Specifications

Block diagram

Related Products

AMC592

Kintex UltraScale FPGA Carrier for FMC, AMC

  • Single module, mid-size AMC (full-size optional)
  • AMC FPGA carrier for FMC per VITA 57
  • Xilinx UltraScale™ XCKU115 FPGA
  • Supported by DAQ Series™ data acquisition software
  • AMC Ports 12-15 and 17-20 are routed to the FPGA for direct FPGA to FPGA board communication
  • AMC Ports 4-11 are routed to FPGA per AMC.1, AMC.2 and AMC.4 (protocols such as PCIe, SRIO, 1/10/40GbE, etc. are FPGA programmable)
  • Two banks of 64-bit wide and a single bank of 32-bitwide DDR4 for a total of 20 GB
  • AMC FCLKA, TCLKA, TCLKB, TCLKC and TCLKD are routed
View product AMC592 Data Sheet

FMC214

70 MHz to 6 GHz Dual Versatile Wideband Transceiver (MIMO), FMC

  • Dual complete transceiver signal chain solution using Analog Devices AD9361 transceiver
  • Frequency range 70 MHz to 6 GHz with instantaneous bandwidth from 200 kHz to 56 MHz
  • MIMO transceiver is Time Domain Duplex (TDD) and Frequency Domain Duplex (FDD) compatible
  • Supported by DAQ Series™ data acquisition software
  • FPGA Mezzanine Card (FMC) per VITA 57
  • Multiplexed 2x RF inputs on each RF channel
  • On-board clocking with multi-card synchronization capability
  • Low Pin Count (LPC) 160-pin connector
View product FMC214 Data Sheet

VPX592

FPGA/FMC Carrier, Kintex UltraScaleā„¢, 3U VPX

  • 3U FPGA carrier for FPGA Mezzanine Card (FMC) per VITA 46 and VITA 57
  • Xilinx Kintex UltraScale™  XCKU115 FPGA
  • High-performance clock jitter cleaner
  • VHDL reference design with source code
  • Protocols such as PCIe, SRIO, 10GbE/40GbE, etc. are FPGA programmable
  • Compatible with VadaTech and 3rd party FMCs
  • 20 GB of DDR4 Memory (2 banks of 64-bit wide, and single bank of 32-bit wide)
  • Health Management through dedicated Processor
View product VPX592 Data Sheet

Info request

Create a list of products to inquire about for more information or quote request.